Advanced Driver Assistance Systems.

Forward Collision-Avoidance Assist (FCA).

Enjoy the safety of automatic braking to help avoid collisions. FCA stops your car fast, even if you’re distracted. Utilising radar and/ or the front camera, the system scans the road ahead and alerts you to slowing or stopped vehicles, cyclists or pedestrians in your path – and automatically applies full braking power if you don’t react in time.

Basic Function.

FCA alerts you to slowing or stopped vehicles, cyclists or pedestrians in your path – and automatically applies full braking power if you don’t react in time.

Junction Turning (FCA-JT).

To protect you when turning left at an intersection, this system assists with emergency braking if there is a risk of collision with an oncoming vehicle.

Junction Crossing (FCA-JC).

Senses sideways-approaching vehicles at intersections and junctions and automatically assists with emergency braking if there is a risk of collision.

Evasive Steering Assist (FCA w/ESA).

FCA w/ ESA proactively assists with emergency steering to avoid a forward collision with other cars, pedestrians, or cyclists.

Lane-Change Side (FCA-LS).

When changing lanes, FCA-LS automatically assists with avoidance steering if there is a risk of collision with a preceding vehicle in the next lane.

Lane-Change Oncoming (FCA-LO).

When overtaking on roads that have two or more lanes, FCA-LO automatically assists with avoidance steering if there is a risk of collision with an oncoming vehicle.

Lane Keeping Assist (LKA).

LKA sends visual and audible alerts if you leave your lane without signalling and initiates subtle corrective steering assistance to steer you back.

Lane Following Assist (LFA).

When activated, it keeps the car centered in its lane at speeds up to 200 km/h on motorways and city streets.

Blind-Spot Collision-Avoidance Assist (BCA).

Warns when a vehicle is in your blind spot. If you begin to change lanes, applies differential braking to move the car back to original centered position.

Exiting a parallel parking spot.¹

When exiting a parallel parking spot and there is a risk of collision with a rear side vehicle, BCA automatically assists with emergency braking.

Blind-Spot Collision Warning (BCW).

Warns you with audio and visual alerts when a vehicle is detected in your blind spot and you begin to change lanes.

Safe Exit Assist (SEA).

Detects vehicles approaching from behind, warns you and temporarily locks first and second-row doors, so passengers can only exit when it is safe.

Safe Exit Warning (SEW).

Detects vehicles approaching from behind, and provides you with visual and audio warnings, so that passengers can exit the vehicle when it is safe.

Rear Occupant Alert (ROA).

ROA perceives occupants in the rear seats and reminds the driver when they exit the vehicle so that nobody is accidentally forgotten, even sleeping kids or pets.

Rear Seat Alert.

If movement has been detected in the rear seats, the driver is notified when they open the door: a dashboard message pops up to “check the rear seats” along with an audio message. 

ROA Sensor.

If the driver ignores these messages and locks the vehicle from the outside, ultrasonic sensors on the ceiling automatically start to monitor indoor movement for 24 hours. If movement is detected, the driver is notified in three ways: car honks alarms and flashes emergency lights for 25 seconds; if equipped with Bluelink, a reminder is delivered to cellular devices.

ROA Radar.

The newest ROA system uses high resolution radar sensors. Radars can measure even minute movements of the chest and blood flow of passengers. So the system is sophisticated enough to distinguish adults, infants, and pets.

Intelligent Speed Limit Assist (ISLA).

Reads traffic signs using the front camera and warns if you are driving over the speed limit. Adjusts speed in combination with Smart Cruise Control to match the speed limit when activated.

Driver Attention Warning (DAW).

DAW analyses the driver’s attention level while driving. Provides a warning when signs of driver inattentiveness are detected, and recommends a rest if needed.

Blind-Spot View Monitor (BVM).

When a turn signal is used, the view of that side of your Hyundai is shown in the centre cluster for top visibility and zero blind spots.

High Beam Assist (HBA).

Detects vehicles and automatically switches to low beam. When no more vehicles are detected, it reactivates the high beams, maximising your range of vision.